Substitutes and Replacements for Synthrapol (Ingredients List) Update 05/2022

Some bottles of this product have been designated as cancer-causing by the state of California. Other states, however, do not share California’s viewpoint. It’s up to you how you use Synthrapol; you might want to wear gloves, but those could also cause cancer.

Ingredients in Synthrapol: Water, rubbing alcohol, and ethoxylated and sulfated aliphatic alcohols make up this cleansing solution. If you don’t have any of this cleaner on hand, you can use any excellent laundry detergent instead.

Continue reading our article to learn more about this product and what you can use in its place. It contains all of the information you’ll need to effectively use this or other cleaners while dyeing clothes. Take a few minutes to discover if this product can assist you with your dyeing tasks.

What is Synthrapol Used For?

What-is-Synthrapol-Used-For

For your dyeing work, use this cleaner. It is used as a pre-wash to thoroughly clean the fabric before placing it in the reactive dye vat. When the dying is finished, you can use it as an after wash to remove any excess reactive dye substance.

It can be used to dampen the fabric so that the dye adheres better to the fibers. Furthermore, this cleaner is said to be effective at removing Procion dyes as well as preventing alternative dark-colored dyes from fading or coming off the fabric.

Many claims concerning this product may abound on social media, but not all of them are real and easily debunked. This cleanser is also said to be gentle on textiles like silk and wool, which may explain its popularity.

Why Use Synthrapol?

This product is used to improve the color of your clothing and to preserve the fresh dye color on the fibers rather than getting lost in the water. Not only is it designed to clean those fibers during the pre-wash, but it’s also supposed to keep the dye away from other materials, preventing color bleed.

In other words, it’s a good cleaner that keeps loose dye molecules from leaving the coloured clothing and latching on to other items in the wash. However, this does not imply you are immune to color bleed, as it will occur at some point in future washes.

All of this adds up to Synthrapol making your coloring results better than they would be if you didn’t use this solution. Because your fibers are so clean, your colors should be more even and the new dye should be more receptive.

When to Use Synthrapol?

Because this cleaner is designed to aid in the dyeing process, the timing is crucial. Its purpose as a pre-wash is to thoroughly clean the fibers and ensure that they are ready for the dye bath. As a result, one critical time to apply it is at the start of the dyeing process, before your dye baths are ready.

The following time you should use this product is as an after wash. The cleaner is reported to be able to remove unattached reactive dye molecules, preventing color bleed while washing the coloured garment alongside other clothes.

Some individuals advocate using this cleanser in the dye bath itself. This will help you obtain a more even color throughout the garment you’re dying. When used as an after wash, this cleaner is known for suspending unattached dye molecules, preventing them from spreading to other fabrics and allowing them to be readily rinsed away.

Synthrapol Ingredients

Synthrapol-Ingredients

When you glance at the package, you’ll notice that it’s a simple recipe with simple ingredients that gets the job done. Water, rubbing alcohol, and ethoxylated and sulfated aliphatic alcohols are the main constituents.

As you can see, the main active element in this solution is alcohol, and there is no bleach. This cleanser still cleans fibers quite well despite the omission. The formula also has a neutral PH balance, which prevents reactive dyes from reacting too strongly with the fibers.

Then, unlike normal laundry detergents, it is gentler on silk and wool fabrics. We haven’t stated before that this is a cleanser that works best with hand-dyed fabrics. Simply soak the clothing in this solution before coloring them.

This product contains no brighteners, thus the colors will be darker and darker than if you used a laundry soap that contains brighteners.

Synthrapol Detergent Alternatives

Synthrapol has alternatives currently, and some people believe it will be phased out in the next few years. That might happen right now, as the Dharma trading business has put this notice on its Synthrapol website.

“We’ve officially run out of Synthrapol. We’re working on a successor, so stay tuned! Low Foam is still in stock.” This is a fantastic cleanser for both wool and silk, so finding a replacement may be difficult.

If you don’t have any of this cleaner on hand, regular laundry soap can be used as a substitute. Then, as long as the dishwashing soap does not contain bleach or other harsh cleaning chemicals, you can use it.

If you use standard washing soap, you’ll have to rinse the dyed fabric several times to get the unattached dye particles out. After you’ve rinsed the item well, you can wash it with laundry soap.

The reason for this is that typical laundry soaps have a very high PH level, which could cause the dye to react badly. Eucalan and Orvus Paste are two brands that you can test.

One reason some individuals are looking for a Synthrapol alternative is that the cleanser has a reputation for being harmful. California believes it promotes cancer, and washing with Synthrapol should be done with gloves.

You should not use Rit or any other brand of color remover since such formulas are designed to remove all of the color, not just the unattached dye molecules.

Best Synthrapol Substitute

A cleansing product with a neutral PH factor would be the ideal substitute. Regular soaps are acceptable, although their PH factor is usually high and insufficient. When it comes to dyes, it’s important to keep an eye on the PH levels.

Orvus Paste is another PH-neutral substance that isn’t Synthrapol. It is entirely constituted of sodium lauryl sulfate and is described as a detergent rather than a soap. There are no brighteners, fabric softeners, perfumes, or enzymes in this product.

The one disadvantage is that this recipe is not for home use, as stated on the label of the jar we observed. It’s strictly for industrial use. But that doesn’t rule out the possibility of finding it in a store and bringing it home. This product may induce allergic responses, and hard water may reduce its cleaning effectiveness.

It’s often known as horse shampoo and can be obtained in livestock stores. However, there is one word of caution. Orvus Paste should not be used with vinegar. The PH level drops, allowing SLS to remain in the fibers.

Dawn dishwashing liquid has also been suggested as a decent alternative to this cleanser. However, we shall return to that option momentarily. The original blue Dawn formula, which has no bleach or other additions, is the finest to use.

Does Synthrapol Go Bad?

Does-Synthrapol-Go-Bad

Synthrapol, according to what we’ve read, does not go bad. At the very least, no one has noticed its limited shelf life. Given the massive amounts in which this cleanser is supplied, it is unlikely that it will run out anytime soon.

In addition, you don’t need a lot of Synthrapol in any pre- or post-wash. One suggestion is to use only 1/4 cup in a top-loading washer, while another suggests using only 1/2 teaspoon per pound.

You should use even less if you have a front-loading washer. If you use too much, the foaming effect can cause difficulties. Furthermore, using more will not improve the outcomes or improve the quality of the washes.

By using too much Synthrapol in any wash, you end up wasting money. Simply use caution when using this cleanser in your various washes. When given the chance, a little goes a long way.

Synthrapol vs Retayne

Both cleaners have one thing in common: they require extremely hot water to function properly. The Retayne requires a 20-minute soak in hot water, but the Synthrapol just need 10 to 12 minutes.

One of the most significant differences between the two products is that the former hinders dye molecules from reattaching to fibers, while the latter aids dye molecules in their attachment to a specific fabric.

Synthrapol’s additional responsibilities include eliminating sizing, oils, fingerprints, and other contaminants that would cause the dyeing process to stop or interfere. Even though it can be used as a pre-wash, Retayne does not do so.

Retayne should not be used on a finished quilt since it may cause the dye to move. Synthrapol should be used first to wash the cloth to remove loose dye molecules, and then Retayne should be used to fix any color so it stays on the fabric.

Synthrapol vs Dawn

It’s important to remember that the two cleaners have different goals. While Synthrapol is effective in cleaning fibers, it may not be effective on all stains. Even with the greatest cleaners, greasy stains can be tough to remove.

Dawn, on the other hand, is fantastic at removing those difficult-to-remove oily stains from fabrics. It’s a good pre-wash alternative that doesn’t cause color bleed, as we discovered. It’s also soft on fabrics for the most part, so you shouldn’t have any problems with your clothes if you use this Synthrapol replacement.

Another feature that distinguishes Dawn from other cleansers is that it is non-toxic. Dawn, unlike its competition, is practically safe to use at all times and even when not wearing gloves.

Synthrapol is classified as a dangerous cleanser in several areas, and warning labels are placed on its container. The rubbing alcohol ingredient, rather than the other alcohols used to make this detergent, is the source of the warning labels.

If you don’t have Synthrapol on hand, you might be better off using dawn or other replacements to fight with filth and grime.

Where to Buy Synthrapol Detergent

Where-to-Buy-Synthrapol-Detergent

Where would people go if they didn’t have Amazon? It’s only natural that this market would stock Synthrapol, and it does. You should be able to locate it easily on that website, as it sells at least the Jacquard brand of Synthrapol.

If you don’t want to buy from Amazon, Wal Mart has some, and a simple trip to your local big-box store might help you find some more. Dharma Trading used to sell this cleanser under their own name, however as you can see from the notice above, they appear to be out of the ordinary variety.

There is a low foam option at that store, however we’ve heard it takes several washes to get rid of the stink. Synthrapol is a brand of jacquard that you can easily find on their website.

One thing is certain: you will not run out of options when it comes to purchasing this cleaner. It’s not as hard to come by as Orvus Paste, which is more of an industrial cleaning sold in animal supply stores.

How to Use Synthrapol On a Quilt

Fill your washing machine tub with 140°F water and 1–2 teaspoons Synthrapol. Place your cotton cloth in the machine and run it for 10 to 12 minutes. A warm rinse is also recommended.

Fill a bucket large enough to handle the quilt with the same amount of hot water for hand washing. For every gallon of water in the tub, add 1 teaspoon of Synthrapol and swish the material around for 5 to 10 minutes with a wooden spoon. After rinsing with warm water, pat dry.

Follow the handwashing directions for the tub and the water temperature for a pre-dye soak. Only a quarter teaspoon of Synthrapol per gallon of water is required. Then swirl about with a wooden spoon for 5 minutes (after you have added the fabric).

Before putting the material in the dye bath, make sure to wring out all of the excess water.

How to Use Synthrapol For Tie-Dye

How-to-Use-Synthrapol-For-Tie-Dye

The pre-washing instructions would be the same as those listed above. The secret to utilizing Synthrapol is to tie-dye the fabric first. After allowing the tie-dyed clothing, etc. to dry for 2 to 24 hours, use this cleanser.

Follow the aforementioned washing machine instructions, but just use a small amount of Synthrapol Sp detergent. It is not recommended for use in front-loading washers because it can produce a lot of suds. If you have rinsed a lot of the dye off earlier, use cold water and roughly 1 to 2 tbsp of the cleanser in the initial wash. If you haven’t already, 1/4 cup

Use warm to hot water in the next wash or two, and gradually increase the amount of Synthrapol added, using smaller amounts each time. Wash as many times as necessary to remove all of the loose colour.

Some Final Words

Synthrapol can be used as both a dye cleaner and a dye booster. They may be required because some believe it will be gone in a few years. The poisonous reputation of this detergent may be the reason for its demise.

If you enjoy using the product, stock up on it, or be prepared to switch to a less effective cleaner later.

Leave a Reply

Your email address will not be published.